Reliability you
can count on.
Embedded Solutions > 5.25" Embedded > EBC 572
|
 View Larger Image |
Ordering Information:
| EBC572-LF(104) | NEXCOM EBC572-LF(104) 5.25" Intel® Pentium® M/Celeron® M Board with LVDS/Dual LAN w/ PC/104 |
| General | |
| Display Interface | Intel® 855GME/852GM chipset integrated with graphics controller; Up to 64 MB of dynamic video memory; Hardware motion compensation assist for software MPEG/DVD decoder |
| Form Factor | 5.75" |
| LAN | 2 x 10/100 Ethernet LAN (180 degree; Optional 90 degree RJ45 connector by request) |
| Serial port | 1 x 40-pin header, supports 4 x 16C550 UARTs (3 x RS232 + 1 x RS 232/422/485) |
| USB | 4 ports, with 1x6 JST (2.0 mm) |
| VGA | 2.0 mm pin header for CRT output |
| Display | |
| LVDS | DF13-20DP, 2 x 20-pin connector, sup |
| System Chipset | Intel® 855GME Chipset For EBC 572(104), Intel® 852GM Chipset For EBC 572(104)-C65; Intel® 82801 DB (ICH4) |
| I/O | |
| HDD | Ultra ATA 100/66/33 support, 1x 40-pin header |
| System | |
| BIOS | Award System BIOS; Plug & Play support; ACPI 1.0b compliant; 4 Mbit flash ROM |
| Certifications | CE approval; FCC Class A |
| CPU | Single Micro-FCPGA Socket 478; Supports Intel® Pentium® M processor up to 1.7 GHz with 1 MB L2 Cache, 400MHz FSB; Supports Intel® Pentium® M processor up to 2.0 GHz with 2 MB L2 Cache, 400MHz FSB; Supports Intel® Celeron® M processor from 600 MHz up |
| Dimensions | 203mm(L) x 146mm(W) (7.9"x5.7") |
| Ethernet | 1 x Intel® 82551QM 10/100 Fast Ethernet LAN; 1 x Intel® 82562EM 10/100 Fast Ethernet LAN |
| HDD | 1 x 40-pin IDE connector (Secondary) |
| Memory | 2 x 184-pin DIMM sockets, up to 2 GB unbuffered DDR 200/266/333/400 SDRAM; 855GME model supports ECC memory; 852GM model does not support ECC memory |
| Operating Temperature | -20°C to 60°C |
| Power Consumption | Pentium-M1.6 GHz:+12V +5V 3.3V; Full-Loading Mode - 0.1A 5.15A 0.5A. NOTE:1.5VSB is depending on standby power require. 2.Full Loading - Utilize CPU 100% with Burn-in test running |
| Power Supply | 20-pin ATX, power input connector |
| Relative humidity | 10% to 90% (Non-condensing) |
| RTC | On-chip RTC with battery back up; 1 x External Li-Lon battery |
| Storage Temperature | -20°C to 80°C |
| System Monitor | Derived from super I/O to support system voltage, fan speed, temperature monitoring |
Introduction
The Nexcom EBC 572 Series is a 5.25" form factor embedded board computer with socket 478 that supports Intel® Pentium® M/Celeron® M or on-board 479-pin LV/ULV Pentium® M processors with 400 MHz FSB and up to 2 MB L2 cache.
The EBC 572 incorporates an Intel® 82852GM or 82855GME and 82801 DB (ICH4) chipset.
The Intel® 82855GME supports un-buffered ECC DDR 200/266/333 memory up to 2GB maximum and an integrated graphic controller with 64 MB of VGA shared memory, a CRT and 36-bit LVDS display interface.
The low power consumption South Bridge ICH4 provides one PCI slot, a PC/104 interface, parallel port, slim type floppy connector, 40-pin IDE connector, CompactFlash socket,
four serial ports supported by 40-pin header, four USB 2.0 ports supported by two JST 6-pin connectors, two 10/100 LAN ports, an optional audio interface with EBK AC97 module as well as others.
The EBC 572 Series with great processor choices, I/O, and display support offer an flexible embedded solution.
Features:
- 2 x 184-pin DIMM, Supports DDR 200/266/333 Memory Up to 2 GB
- 2 x Intel® 82551QM/82562 EM 10/100 LAN
- Intel® 855GME Chipset For EBC 572/572A/ EBC 572(LF), Intel® 852GM Chipset For EBC 572-C65/ EBC 572(LF)-C65
- PC/104 and CompactFlash Socket
- Supports 36-bit LVDS
- Supports Intel® Pentium® M/ Celeron® M Processor Up to 2 GHz+ with 400 MHz FSB