Industrial PC Solutions

Industrial PC Solutions > PICMG 1.0 > 10P0870VL00X0


Part Number

10P0870VL00X0

Vox Part Number

VTC9864742

Make

NEXCOM

Description

Nexcom 10P0870VL00X0 CPU board with Intel Pentium 4/Pentium D/Celeron D Processor and Intel 945G and ICH7R chipset

Model

10P0870GC00X0


View Larger Image

General
TemperatureBoard level operating:0°C to 60°C; Storage:-20°C to 80°C
Display
ChipsetIntel 945G +ICH7R (PEAK 870VL2); Intel® 945GC +ICH7 (PEAK 870GC)
Display InterfaceIntel 945G GMCH Integrated Intel GMA 950, Max 128 MB of DVMT for graphics memory allocation; Analog display support up to 2048 x 1536 @ 85 Hz for CRT
I/O
AudioAC’ 97 Audio Codec, Realtek ALC655; 3 x (1x4 pin header) for Line in /Line out /MIC in
I/OUSB 2.0:8 ports (4 on board, 4 to backplane); Serial port:2 port, with 2x5pin headers (COM 2 support RS232/RS422/RS485); IDE:1 x 40-pin connector. Support Ultra ATA 100/66/33; Disk on Module:1 x 2-pin power connector for DOM; SATA HDD:4 ports,
System
BIOSAward System BIOS; Plug & Play support; Advanced Power Management and Advanced Configuration & Power Interface support
CertificationsCE approval; FCC Class A
CPUSupport Intel LGA775 Core 2 Duo/Pentium 4/Pentium D/Celeron D processors, Intel Embedded Processor List (Intel Longevity CPU):Intel Core 2 Duo Processor E6400 & E4300 & E2160, Intel Pentium 4 Processor 651 & 551 & 531, Intel Celeron
DimensionsPICMG 1.3 SHB, 338.58 mm (L) x 126.39 mm (W) (13.3" x 4.9")
Ethernet2 x Intel 82573L PCIe Gigabit Ethernet Controllers; Supports Boot from LAN
Memory2 x 240-pin DIMM, for up to 4 GB dual channel Non-ECC DDR2 533/667 SDRAM, Note: Maximum 4 GB. Actual memorey size is dynamic based on the OS I/O resource allocation
Power SupplyPower source from backplane through golden finger; Supports both ATX or BTX power supplies; 4-pin +12 V power input connector:CPU:2 x Core 2 Duo (E6700) 2.66G, Memory: 2 x DDR2 533Mhz 1GB: +12V +5V +3.3V +5Vsb; Full-Loading Mode:4.43A 3.42A 0.63A 0.0
Relative humidity10% to 90% (Non-condensing)
System Monitor8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb), 2 temperature; 3 fan speed monitors
Watchdog Timer1-minute increments from 1 to 255 minutes; 1-second increments from 1 to 255 seconds; On-chip RTC with battery backup; 1 x External Li-Ion battery

Introduction
First PICMG 1.3 full-size Single Board Computer (SBC), which support Intel Core2 Duo technology. Featuring Intel 945G and ICH7R chipsets, the PEAK 870VL2 supports socket LGA775 of IntelPentium 4/Pentium D/Celeron D processor with 533/800/1066 MHz FSB supporting speeds up to 3.8 GHz and Hyper-Threading technology. The Intel 945G supports dual channel non-ECC DDR2 533/667 MHz memory in two DIMM slots and an integrated graphics controller. The South Bridge ICH7R manages Ultra ATA 100 & SATA HDD ports, parallel port, and floppy port. Furthermore, it supports other versatile I/O ports such as two serial ports, eight USB ports, and two PCI Express Gigabit LAN ports. NEXCOM offers the following 2U and 4U backplanes that support the PICMG 1.3 specification:
2U Backplane: NBP 2U220/NBP 2U040
4U Backplane: NBP 14570/NBP 14111/NBP 14210
The PEAK 870VL2 with Intel Core 2 Duo technology and PCI Express LAN offer a great solution for advanced industrial application that require superb display and processing performance.

Features:

  • 2 x 82573L PCI Express Gigabit Ethernet LAN
  • 4 x SATA, 8 x USB 2.0, 2 x COM , 1 x Parallel , 1 x Floppy
  • Analog Display Supports up to 2048 x 1536 at 85 Hz for CRT
  • Intel 945G GMCH Integrated Intel GMA 950, Max 128 MB of DVMT for Graphics Memory Allocation
  • Intel LGA775 Core 2 Duo / Pentium 4 / Pentium D / Celeron D Processors with 533/800/1066 MHz
  • Supports Dual Channel Non-ECC DDR2 533/667 MHz up to 4 GB